Before installing the conveyor belt, a series of meticulous preparations are the key to ensuring the smooth operation of the equipment and extending its service life. Next, let's discuss in detail the preparation steps that need to be taken before installing the conveyor belt.

First, we need to check whether the frame is strong. As the basic support of the conveyor belt, the stability of the frame directly affects the running stability of the conveyor belt. Therefore, before installation, it is necessary to ensure that the diagonal lengths of the frame are equal to ensure that the conveyor belt can run smoothly.

Secondly, check whether the brackets of various parts of the fuselage are deformed. If the brackets are deformed, it will not only affect the installation accuracy of the conveyor belt, but also may cause safety hazards to the operation of the conveyor belt. Therefore, when the brackets are deformed, they must be promptly strengthened and repaired or replaced if necessary.

Next, check whether there are foreign objects on the support pulley, such as grease, dust, etc., which will affect the rotation flexibility and service life of the pulley. Therefore, before installation, the pulley must be cleaned in time to ensure that the surface of the pulley is clean and smooth.

At the same time, we also need to check the rotation flexibility and damage of the support roller. The roller is an important supporting component during the operation of the conveyor belt. If it is not flexible or damaged, it will have a serious impact on the operation of the conveyor belt. Therefore, before installation, it is necessary to ensure that the roller can rotate flexibly and without damage.

In addition, we also need to remove the accessories such as the sweeper hopper and rubber flange and check their integrity. Although these accessories do not directly affect the operation of the conveyor belt, they may scratch or damage the conveyor belt during installation. Therefore, before installation, they must be removed and properly kept, and then installed after the conveyor belt is installed.

Finally, check whether the tensioning device moves flexibly and adjust the tensioning device to the shortest. The tensioning device is an important component for adjusting the tightness of the conveyor belt, and its flexibility directly affects the running stability of the conveyor belt. Therefore, before installation, it is necessary to ensure that the tensioning device moves flexibly and adjust the tensioning device to the appropriate position as needed.

Through the above series of preparations, we can lay a solid foundation for the installation of the conveyor belt and ensure that the conveyor belt can maintain a stable and efficient state during operation.